git.lirion.de

Of git, get, and gud

aboutsummaryrefslogtreecommitdiffstats
path: root/init.d/infinoted
diff options
context:
space:
mode:
Diffstat (limited to 'init.d/infinoted')
-rwxr-xr-xinit.d/infinoted186
1 files changed, 186 insertions, 0 deletions
diff --git a/init.d/infinoted b/init.d/infinoted
new file mode 100755
index 0000000..d416d34
--- /dev/null
+++ b/init.d/infinoted
@@ -0,0 +1,186 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides: infinoted
+# Required-Start: $network $remote_fs $syslog
+# Required-Stop: $network $remote_fs $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Launches infinoted.
+# Description: My hovercraft is full of eels.
+### END INIT INFO
+
+# Author: Harald Pfeiffer <coding@lirion.de>
+# Version: 0.666
+# This is basically the SysVinit skeleton from Debian with
+# whatever adjustments necessary (see comment lines) for infinote.
+# Lazy work, no comments removed, loads of hubbub remaining.
+#
+# Alterations made to the skeleton mechanics and not commented below:
+# status_of_proc: So we set up a $PIDFILE and don't pass it on to
+# status_of_proc? What's the danger in this? In infinoted's case,
+# however, we are heavily dependent on this. Added.
+
+# Additional remarks:
+# CLI output: infinoted insists on puking its loaded plugins at you at any
+# startup, so the LSB startup line might look a bit chaotic.
+# Unfortunately, same as the location of the PID file, this is
+# hardcoded. *claps*
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+# hp -- demo has a Debian package, might need to add /usr/local or whatever else here
+# when compiling yourselves
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="Infinoted, a server for collaborative editing"
+NAME=infinoted
+DAEMON=/usr/bin/$NAME
+# hp -- We are now presenting some defaults here, will be overwritten if present in /etc/default/$NAME
+INFINOTE_ROOT="/usr/local/share/infinoted"
+INFINOTE_CERT="/etc/infinoted/cert.pem"
+INFINOTE_KEY="/etc/infinoted/key.pem"
+INFINOTE_PORT="6663"
+# hp -- infinoted is a nasty fucker with its pid file: it's hardcoded*. Whatever you pass on as -r
+# (infinote document root) will be used for the pid file as well ):
+# * harcoded as in: no option to change this path. Wonderful.
+# You might of course set up the document directory before (; don't forget to adjust
+# SCRIPTUSER below
+# hp -- Mind the major infinote release - the devs decided to put its number into the pid file name.
+# Bleh.
+PIDFILE=$INFINOTE_ROOT/.infinoted/infinoted-0.5.pid
+SCRIPTNAME=/etc/init.d/$NAME
+# hp -- add a user to execute this. Might not want to run this as root (:
+SCRIPTUSER="infinote:infinote"
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+DAEMON_ARGS="-d -c $INFINOTE_CERT -k $INFINOTE_KEY -p $INFINOTE_PORT -r $INFINOTE_ROOT"
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ start-stop-daemon -c $SCRIPTUSER --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon -c $SCRIPTUSER --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+ # Add code here, if necessary, that waits for the process to be ready
+ # to handle requests from services started subsequently which depend
+ # on this one. As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ start-stop-daemon -c $SCRIPTUSER --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon -c $SCRIPTUSER --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ # Many daemons don't delete their pidfiles when they exit.
+ #rm -f $PIDFILE
+ return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ start-stop-daemon -c $SCRIPTUSER --stop --signal 1 --quiet --make-pidfile --pidfile $PIDFILE --name $NAME
+ return 0
+}
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ status)
+ status_of_proc -p $PIDFILE "$DAEMON" "$NAME" && exit 0 || exit $?
+ ;;
+ #reload|force-reload)
+ #
+ # If do_reload() is not implemented then leave this commented out
+ # and leave 'force-reload' as an alias for 'restart'.
+ #
+ #log_daemon_msg "Reloading $DESC" "$NAME"
+ #do_reload
+ #log_end_msg $?
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+: