diff options
Diffstat (limited to 'localfs/etc/httpd/conf.d/ssl.conf')
| -rw-r--r-- | localfs/etc/httpd/conf.d/ssl.conf | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/localfs/etc/httpd/conf.d/ssl.conf b/localfs/etc/httpd/conf.d/ssl.conf new file mode 100644 index 0000000..9891aca --- /dev/null +++ b/localfs/etc/httpd/conf.d/ssl.conf @@ -0,0 +1,224 @@ +# +# When we also provide SSL we have to listen to the +# standard HTTPS port in addition. +# +Listen 443 https + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +SSLSessionCache shmcb:/run/httpd/sslcache(512000) +SSLSessionCacheTimeout 300 + +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the +# SSL library. The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +SSLRandomSeed startup file:/dev/urandom 256 +SSLRandomSeed connect builtin +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + +# +# Use "SSLCryptoDevice" to enable any supported hardware +# accelerators. Use "openssl engine -v" to list supported +# engine names. NOTE: If you enable an accelerator and the +# server does not start, consult the error logs and ensure +# your accelerator is functioning properly. +# +SSLCryptoDevice builtin +#SSLCryptoDevice ubsec + +## +## SSL Virtual Host Context +## + +<VirtualHost _default_:443> + +# General setup for the virtual host, inherited from global configuration +#DocumentRoot "/var/www/html" +#ServerName www.example.com:443 + +# Use separate log files for the SSL virtual host; note that LogLevel +# is not inherited from httpd.conf. +ErrorLog logs/ssl_error_log +TransferLog logs/ssl_access_log +LogLevel warn + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# List the protocol versions which clients are allowed to connect with. +# Disable SSLv3 by default (cf. RFC 7525 3.1.1). TLSv1 (1.0) should be +# disabled as quickly as practical. By the end of 2016, only the TLSv1.2 +# protocol or later should remain in use. +#SSLProtocol all -SSLv3 +#SSLProxyProtocol all -SSLv3 +SSLProtocol -all +TLSv1.2 +SSLProxyProtocol -all +TLSv1.2 + +# User agents such as web browsers are not configured for the user's +# own preference of either security or performance, therefore this +# must be the prerogative of the web server administrator who manages +# cpu load versus confidentiality, so enforce the server's cipher order. +SSLHonorCipherOrder on + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate. +# See the mod_ssl documentation for a complete list. +# The OpenSSL system profile is configured by default. See +# update-crypto-policies(8) for more details. +#SSLCipherSuite PROFILE=SYSTEM +# Mozilla intermediate recommendation, 2016-09-06. After !DSS, some additional setup: +SSLCipherSuite ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS:!AES128-SHA:!DES-CBC3-SHA:!AES256-SHA:!AES128-SHA256:!AES256-SHA256:!AES128-SHA256:!AES256-GCM-SHA384:!AES128-GCM-SHA256:!ECDHE-RSA-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA +SSLProxyCipherSuite PROFILE=SYSTEM + +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that restarting httpd will prompt again. Keep +# in mind that if you have both an RSA and a DSA certificate you +# can configure both in parallel (to also allow the use of DSA +# ciphers, etc.) +# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt) +# require an ECC certificate which can also be configured in +# parallel. +SSLCertificateFile /etc/pki/tls/certs/localhost.crt + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +# ECC keys, when in use, can also be configured in parallel +SSLCertificateKeyFile /etc/pki/tls/private/localhost.key + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convenience. +#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +#<Location /> +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +#</Location> + +# SSL Engine Options: +# Set various options for the SSL engine. +# o FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# o ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# o StdEnvVars: +# This exports the standard SSL/TLS related `SSL_*' environment variables. +# Per default this exportation is switched off for performance reasons, +# because the extraction step is an expensive operation and is usually +# useless for serving static content. So one usually enables the +# exportation for CGI and SSI requests only. +# o StrictRequire: +# This denies access when "SSLRequireSSL" or "SSLRequire" applied even +# under a "Satisfy any" situation, i.e. when it applies access is denied +# and no other module can change it. +# o OptRenegotiate: +# This enables optimized SSL connection renegotiation handling when SSL +# directives are used in per-directory context. +#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire +<FilesMatch "\.(cgi|shtml|phtml|php)$"> + SSLOptions +StdEnvVars +</FilesMatch> +<Directory "/var/www/cgi-bin"> + SSLOptions +StdEnvVars +</Directory> + +# SSL Protocol Adjustments: +# The safe and default but still SSL/TLS standard compliant shutdown +# approach is that mod_ssl sends the close notify alert but doesn't wait for +# the close notify alert from client. When you need a different shutdown +# approach you can use one of the following variables: +# o ssl-unclean-shutdown: +# This forces an unclean shutdown when the connection is closed, i.e. no +# SSL close notify alert is sent or allowed to be received. This violates +# the SSL/TLS standard but is needed for some brain-dead browsers. Use +# this when you receive I/O errors because of the standard approach where +# mod_ssl sends the close notify alert. +# o ssl-accurate-shutdown: +# This forces an accurate shutdown when the connection is closed, i.e. a +# SSL close notify alert is sent and mod_ssl waits for the close notify +# alert of the client. This is 100% SSL/TLS standard compliant, but in +# practice often causes hanging connections with brain-dead browsers. Use +# this only for browsers where you know that their SSL implementation +# works correctly. +# Notice: Most problems of broken clients are also related to the HTTP +# keep-alive facility, so you usually additionally want to disable +# keep-alive for those clients, too. Use variable "nokeepalive" for this. +# Similarly, one has to force some clients to use HTTP/1.0 to workaround +# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and +# "force-response-1.0" for this. +BrowserMatch "MSIE [2-5]" \ + nokeepalive ssl-unclean-shutdown \ + downgrade-1.0 force-response-1.0 + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog logs/ssl_request_log \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + +</VirtualHost> + |